Aussie Slouch Hat (Open Crown)

by Akubra
Australia
$165.00
Item No. 1601
Hat Size:
Qty:

The Aussie Slouch Hat, one side turned up against the crown, has gained worldwide recognition. Akubra has made these hats for the Australian Army since the early 1900's. Proven in the toughest of desert and jungle conditions by Australia's fighting men, the Slouch Hat enjoys an unequaled reputation for rugged quality. Worn with the distinctive puggaree, or custom trimmed with a braided kangaroo band, it retains the characteristic jaunty air of assurance. The Aussie Slouch by Akubra is the authentic full-quality military hat, pure fur felt, Superfine Quality, brass clip and loop to hold the brim, complete with puggaree and chin strap. The brim is 3½ inches wide, bound edge. 5½ inch open crown, unlined, shipped uncreased. Reeded roan leather sweatband. UPF rating 50+.Made in Australia.

The Aussie Slouch Hat, one side turned up against the crown, has gained worldwide recognition. Akubra has made these hats for the Australian Army since the early 1900's. Proven in the toughest of desert and jungle conditions by Australia's fighting men, the Slouch Hat enjoys an unequaled reputation for rugged quality. Worn with the distinctive puggaree, or custom trimmed with a braided kangaroo band, it retains the characteristic jaunty air of assurance. The Aussie Slouch by Akubra is the authentic full-quality military hat, pure fur felt, Superfine Quality, brass clip and loop to hold the brim, complete with puggaree and chin strap. The brim is 3½ inches wide, bound edge. 5½ inch open crown, unlined, shipped uncreased. Reeded roan leather sweatband. UPF rating 50+.Made in Australia.

  • View Colors
    • British Khaki
  • Product Features
    • Pure fur felt -- Akubra's Superfine Quality
    • Open Crown, 5½" to top
      Shape the crown to your desired shape.
      (instructions included)
    • 3½" brim, bound edge
    • Puggaree and chin strap included
    • Brass clip to hold the brim
    • Unlined
    • Reeded roan leather sweatband
    • Chin strap hooks
    • 2 horizontal eyelets for ventilation on each side of crown, set rather high, a little above the turned up brim
    • Color is British Khaki
    • Sizes 54 (6¾) through 63 (7⅞)
    • Authentic Australian military hat
    • Made in Australia by Akubra
  • Hat Sizing & Care

    Heads come in all sizes, and in a surprising variety of shapes. Although fur felt hats are adaptable, and will usually conform to differences in shape with a little wearing, it is essential that the size be correct for the head.

    To determine your hat size, measure the circumference around your head, keeping the tape level and firm, across the temples and above the eyebrow ridges. Check the size chart given below. For in-between measurements use the next size up.

    Circumference of head where hat brim sits:

    Inches 21⅛ 21½ 21⅞ 22¼ 22⅝ 23 23½ 23⅞ 24¼ 24⅝ 25 25½
    US Hat Size 6⅞ 7 7⅛ 7⅜ 7⅝ 7⅞ 8 8⅛
    Metric Size 54 55 56 57 58 59 60 61 62 63 64 65
    Inches US Hat Size Metric Hat Size
    21⅛ 54
    21½ 6⅞ 55
    21⅞ 7 56
    22¼ 7⅛ 57
    22⅝ 58
    23 7⅜ 59
    23½ 60
    23⅞ 7⅝ 61
    24¼ 62
    24⅝ 7⅞ 63
    25 8 64
    25½ 8⅛ 65

    Check the Fit
    When your hat arrives, check the fit before wearing to make sure you have ordered the correct size:

    1. The sweatband inside the hat should fit securely on the head without binding.

    2. For some in-between sizes, and for some head shapes, greater comfort may be attained by placing felt pads inside the sweatband. Felt pads are enclosed with Akubra hats.

    3. The top of the crown should not be so low that it touches the top of your head and prevents the hat from coming down far enough to seat properly. If it does, with a leather or cloth hat you may need a smaller size. With an Akubra fur felt hat the top can be adjusted. Check the information sheet supplied with the hat.

    If the hat does not fit, recheck your hat size, and exchange your hat for the correct size. Hats in unused condition with all tags can be returned within 90 days of purchase for exchange or full refund of product price.

    Hat Care
    Akubra Hats are made to be worn by active outdoorspeople. They are made to give full satisfaction during years of service, through sun and rain. There is no need to baby your Akubra, but if you treat it with understanding, it will look better and last longer.

    Do not pick up your hat by pinching the crown, either at the top or front. Pinching will flex the felt, and eventually cause a hole or crack to develop in the felt. It is best to pick up the hat either by the front and back of the brim, or by placing the thumbs inside the leather sweat band at the sides with the fingers just touching the outside edge of the brim.

    Rain or sun do not harm a pure fur felt hat. There is no need for plastic rain covers -- these merely keep the felt from breathing properly and so make your head uncomfortable. Do not heat a wet hat. Heat will shrink the felt, as well as the leather. Stand the hat upside down on its crown, or hang on a hook in a cool place and let it dry naturally. Wet felt retains the shape in which it dries, so make sure the brim and crown are shaped as you want them before drying. Do not leave a hat standing flat on its brim, as this will distort the brim. Never put your hat on the back ledge of your car or truck in the sun, as the heat may shrink and damage the leather sweatband. If your hats must of necessity be dried or stored under warm conditions, storing the hat on a Hat Stretcher, set to your hat size, will be beneficial.

    Dust and grime are bound to accumulate on a hat under any normal conditions. Dust can be removed by brushing with a soft brush. Always brush with the nap, in a counterclockwise direction. Dust can also be removed by wiping the hat with a damp (not wet) towel.

  • Open Crown Hats

    The Akubra hats with an open crown allow you to put your own personal bash or crease in the crown. A hat maker would use steam to make the shape permanent but steam may also shrink the felt. The better way for those who are not hat makers is to put in a preliminary shape, then when the hat is damp from the rain adjust it to the desired final shape and let it dry. This not only avoids shrinkage problems, but also lets you try out the preliminary shape and change it if needed.

    For the Slouch, we prefer the traditional Australian Army choice of a center crease, a dent on the top from front to rear. Please refer to our online instructions: "Bashing your Open Crown Akubra" or download our Hat Manual for more help.

You May Also Like

Snowy River Hat
$155.00
Hat Stretcher
$23.00
Marine Sweater, Zip Turtleneck
$239.00
Brumby Jacket
$280.00

Customer Reviews