Reject Snowy River Hat, Wavy Band

by Akubra
Australia
$135.00 $80.00
Item No. 1611REJ
Hat Size:
Color:
Qty:

Our loss is your opportunity. We received a shipment of Snowy River hats from Australia with unacceptable ornamental bands, where the bands have a decidedly wavy shape. The quality of the fur felt hat is first rate, just the band is not up to Akubra's high standards. Each reject hat is unique, with varying degrees of waviness. We are offering these reject hats at a bargain price, cheap enough that you may purchase one of our hand braided leather hat bands to replace the faulty band.

The Snowy River is a pre-creased stockman's hat from Akubra, a classic Australian outback hat. It has a pinched telescope crown and a brim with rolled sides with front and back turned down. This enduring outback style may be worn over the eyes or well back on the head in typical Australian fashion. The crown is 4 inches high. The brim is 3¼ inches wide, with a raw edge. The pure fur felt is Akubra's Imperial Quality. The hat is fully lined and has a wavy bonded leather ornamental band (on these reject hats) and chin strap hooks set inside the crown for easy attachment of a chin strap. Reeded roan leather sweatband. UPF rating 50+. Made in Australia. Limited to stock on hand.

Our loss is your opportunity. We received a shipment of Snowy River hats from Australia with unacceptable ornamental bands, where the bands have a decidedly wavy shape. The quality of the fur felt hat is first rate, just the band is not up to Akubra's high standards. Each reject hat is unique, with varying degrees of waviness. We are offering these reject hats at a bargain price, cheap enough that you may purchase one of our hand braided leather hat bands to replace the faulty band.

The Snowy River is a pre-creased stockman's hat from Akubra, a classic Australian outback hat. It has a pinched telescope crown and a brim with rolled sides with front and back turned down. This enduring outback style may be worn over the eyes or well back on the head in typical Australian fashion. The crown is 4 inches high. The brim is 3¼ inches wide, with a raw edge. The pure fur felt is Akubra's Imperial Quality. The hat is fully lined and has a wavy bonded leather ornamental band (on these reject hats) and chin strap hooks set inside the crown for easy attachment of a chin strap. Reeded roan leather sweatband. UPF rating 50+. Made in Australia. Limited to stock on hand.

  • Reject Bands

    These reject Snowy River hats have braided bands with a wavy shape and edge. Note that in places the stitching attaching the inner sweatband to the hat shows.

    The hat can of course be worn with these bands, each one unique, or you can replace the band with one of our fine hand braided leather bands. Step by step instructions for replacing bands are given on our YouTube channel.

  • Product Features
    • Pure fur felt -- Akubra's Imperial Quality
    • Pre-creased pinched telescope crown
      4 inches to peak of crown
    • 3¼" brim, raw edge
    • Bonded leather ornamental band, wavy on these reject hats
    • Fully lined
    • Reeded roan leather sweatband
    • Chin strap hooks
    • Colors are Santone Fawn, Medium Gray or Black
    • Sizes 54 (6¾) through 65 (8⅛)
    • Made in Australia by Akubra
  • Hat Sizing and Care

    Heads come in all sizes, and in a surprising variety of shapes. Although fur felt hats are adaptable, and will usually conform to differences in shape with a little wearing, it is essential that the size be correct for the head.

    To determine your hat size, measure the circumference around your head, keeping the tape level and firm, across the temples and above the eyebrow ridges. Check the size chart given below. For in-between measurements use the next size up.

    Circumference of head where hat brim sits:

    Inches 21⅛ 21½ 21⅞ 22¼ 22⅝ 23 23½ 23⅞ 24¼ 24⅝ 25 25½
    US Hat Size 6⅞ 7 7⅛ 7⅜ 7⅝ 7⅞ 8 8⅛
    Metric Size 54 55 56 57 58 59 60 61 62 63 64 65
    Inches US Hat Size Metric Hat Size
    21⅛ 54
    21½ 6⅞ 55
    21⅞ 7 56
    22¼ 7⅛ 57
    22⅝ 58
    23 7⅜ 59
    23½ 60
    23⅞ 7⅝ 61
    24¼ 62
    24⅝ 7⅞ 63
    25 8 64
    25½ 8⅛ 65

    Check the Fit
    When your hat arrives, check the fit before wearing to make sure you have ordered the correct size:

    1. The sweatband inside the hat should fit securely on the head without binding.

    2. For some in-between sizes, and for some head shapes, greater comfort may be attained by placing felt pads inside the sweatband. Felt pads are enclosed with Akubra hats.

    3. The top of the crown should not be so low that it touches the top of your head and prevents the hat from coming down far enough to seat properly. If it does, with a leather or cloth hat you may need a smaller size. With an Akubra fur felt hat the top can be adjusted. Check the information sheet supplied with the hat.

    If the hat does not fit, recheck your hat size, and exchange your hat for the correct size. Hats in unused condition with all tags can be returned within 90 days of purchase for exchange or full refund of product price.

    Akubra Hats are made to be worn by active outdoorspeople. They are made to give full satisfaction during years of service, through sun and rain. There is no need to baby your Akubra, but if you treat it with understanding, it will look better and last longer.

    Do not pick up your hat by pinching the crown, either at the top or front. Pinching will flex the felt, and eventually cause a hole or crack to develop in the felt. It is best to pick up the hat either by the front and back of the brim, or by placing the thumbs inside the leather sweat band at the sides with the fingers just touching the outside edge of the brim.

    Rain or sun do not harm a pure fur felt hat. There is no need for plastic rain covers -- these merely keep the felt from breathing properly and so make your head uncomfortable. Do not heat a wet hat. Heat will shrink the felt, as well as the leather. Stand the hat upside down on its crown, or hang on a hook in a cool place and let it dry naturally. Wet felt retains the shape in which it dries, so make sure the brim and crown are shaped as you want them before drying. Do not leave a hat standing flat on its brim, as this will distort the brim. Never put your hat on the back ledge of your car or truck in the sun, as the heat may shrink and damage the leather sweatband. If your hats must of necessity be dried or stored under warm conditions, storing the hat on a Hat Stretcher, set to your hat size, will be beneficial.

    Dust and grime are bound to accumulate on a hat under any normal conditions. Dust can be removed by brushing with a soft brush. Always brush with the nap, in a counterclockwise direction. Dust can also be removed by wiping the hat with a damp (not wet) towel.

You May Also Like

Ten Plait Hat Band
$56.00
Double Round Hat Band
$64.00
Crocodile Hat Band with Teeth
$70.00
Snowy River Hat
$135.00

Customer Reviews